pls bring paypal back

other payment methods sucks as there is fees etc.

Спасибо за помощь bir3yk. Пожалуйста, отправьте мне сообщение, чтобы отправить мне свой PayPal. Я хочу отправить тебе немного денег.

Теперь у меня это получается. Проблема в том, что я установил Steam и сервер CSS на один компьютер. Сам пользуюсь официальным Steam. Сервер CSS использует steamclient.dll из установочного каталога Steam, поэтому он не работал.
Теперь это работает.

Но теперь у меня проблема, что как только я перезапускаю Steam, steamclient.dll в папке Steam автоматически удаляется и заменяется Steam.

Есть ли этому решение? Итак, если вы запустите Steam и сервер CSS на одном ПК?

Большое спасибо за вашу помощь!

Нет. RevEmu не запускается даже при закрытом Steam.

Вот как я установил RevEmu:

1. Переименовал исходный steamclient.dll в steamclient_valve.dll

2. Скачал последнюю версию RevEmu Windows steamclient.dll и скопировал ее в / bin.

3. Введите в файл rev.ini следующее:

ClientDLL=.\bin\steamclient_valve.dll


Даже в этом случае RevEmu не работает. Очень забавно.

RevEmu, Windows 10, Counter Strike Source по-прежнему не работает. Просьба к просветлению!

Russian:

Всем привет,

последняя версия RevEmu не работает. [16-10-2020] Сервер

Я использую исходный сервер Counter-Strike, Windows.

Что бы я ни делал, RevEmu не запускается.
Журнал тоже не создается.
_____________________________________________________

English:

Hello,

I'm using the newest Version of RevEmu [16-10-2020] Server, for my Counter Strike Source Server Windows.

No matter what Im doing, RevEmu wont work. Theres not even a log file. I have almost tried everything, still no luck.





Heres my Rev.ini

[Emulator]

# CacheEnabled set to true to enable loading apps from GCF.
# If it is true, and a clientregistry.blob file is not supplied,
# then you must supply revApps.ini file with the correct cache requirements.
# See the example revApps.ini, however it is highly recommended that you use
# a clientregistry.blob file for maximum compatibility
#
# Default = False
#
CacheEnabled = false

# CachePath - set to the folder where your GCF files are located
#
# Default = (n/a)
#
CachePath = D:\Steam\SteamApps

# Language - rev emu will automagically load the correct language files.
# This can be English, French, Italian, German, Spanish, sChinese,
# Korean, Koreana, tChinese, Japanese, Russian, Thai, or Portugeuse
#
# revEmu will try to set the Language key in the following order:
# Use the Language key in the this rev.ini if it is present
# Use the Steam Language key in the registry if it is present
# Default the Language to English
#
#Language = English
Language = English

# Change Logging to True to enable/disable log file output for steam.dll
#
# Default = False
#
Logging=false

# Change SteamDll to point to your official Steam client DLL.
# This setting is required for Steam UserID Validation functions
# to support legit Steam IDs. Otherwise, all clients would get
# IDs generated from their IP addresses.
# Also make sure you uncomment the line below (remove "#")
# if you want to use this setting!
# Note that this setting only applies to games using SteamGameServer
# up to version 003. (e.g. CS: Source, Team Fortess 2, Garry's Mod)
#
# Default = (n/a)
#
SteamDll=.\bin\Steam.dll

# Change SteamClient to True if you want to use the steamclient emulator.
# This setting is recommended to be true for both clients \ game servers
# and for all games, except games which use SteamClient006 interface
# (e.g. CS: Source, Half-Life 2: Deathmatch)
# To see if the game is using this old interface, enable SteamClient,
# enable Logging and you will notice a log line "Using SteamClientXXX".
# If 007, leave the option ON, otherwise, it is recommended not to use it.
#
# Default = False
#
SteamClient = True

# Change SteamUser to the steam username that you wish to use with revEmu
# Defaults to revCrew if not specified
#
SteamUser = SteamPlayer

[Log]

# If Logging is set to True, choose which functions would you like to log.
#
# Default = False
#
FileSystem=False
Account=False
UserID=False

[steamclient]

################################### NOTE ####################################
# These settings may apply even if you don't choose to use steamclient.dll! #
#############################################################################
#
# Change the setting below to set your PlayerName (used in src2007 engine)
# not use ""
#
# Default = REVOLUTiON
#
PlayerName=Your name


# Change the setting below to enable/disable log file output for steamclient.dll
#
# Default = False
#
Logging = True

# Change ClientDLL to point to the original steamclient.dll
# This setting will enable VAC for your server and your server will be listed
# on Valve master server! Also, Steam clients will have their regular Steam IDs
# Please use the steamclient.dll from Steam folder!
#
# Default = (n/a)
#
ClientDLL=.\bin\steamclient_valve.dll


# DisableUnlockedItems enables you to choose whether to use the new weapons in
# Team Fortress 2. This setting applies to you only if you are a regular player,
# or to all your clients if you are a server hoster.
#
# Default = False
#
# DisableUnlockedItems = True

# If you use in Ultimate SSDK change the setting below to True
# use only Ultimate SSDK enable else disable.
#
# Default = False
#
#EnableSDK = True

#Use DNS masterservers valve, if port mastersrver 27010-27011 not problem
#if port 27015 use mix MasterServer = 208.64.200.65:27015
#
# Default = False
#
#Use_hl_master = true

#Change the setting to set masterserver, from where serverlist will be got.
#No support Setti masterserver.....
#Default = 72.165.61.136:27015 only for HL2
#Friends tab in serverbrowser shows another masterserver for VIP server ($)
#
#HL1 servers
#MasterServer = 188.40.40.201:27010
#MasterServer = 69.28.158.131:27010
#MasterServer = 209.197.20.34:27010
#MasterServer = 69.28.140.247:27010
#
#HL2 servers
#
#MasterServer = 208.64.200.52:27011
#MasterServer = 208.64.200.65:27015
#MasterServer = 63.234.149.83:27011
#MasterServer = 63.234.149.90:27011
#
#rdkf
#
#MasterServer = 68.142.72.250:27012

#Search game version in MasterServer.
#Default search all version.
#
#GameVersion = 1.0.0.75

#Add rename ClanTag maximum 12 symbol UTF-8 or 24 symbol ANSI
#ex. ClanTag = revcrev
#
ClanTag=[revcrew]

#
# Use avatar enable. Test images no-steam avatar in platform/avatar1.dat(delete\rename it`s file not show this images)
#
# Default = False
#
#Use_avatar = true


[GameServer]
# GameServer policy rules
# Allow (v9.73 < revEmu < 9.83) clients to join your server
#
# Default = True
#
AllowOldRev74=False

# Allow revEmu v9.63 ~ 9.73 clients to join your server
# revEmu v9.62 and below will be rejected nevertheless
#
# Default = True
#
AllowOldRev=False

# Allow unknown clients to join your server
#
# Default = True
#
AllowUnknown=False

# Allow cracked Steam clients to join your server
#
# Default = True
#
#AllowCracked=False

# Allow legitimate Steam clients to join your server
#
# Default = True
#
#AllowLegit=False

#Allowed any count connect Unknown client with one IP (25 Unknown clients 1 IP default true)
#
#AllowedAnyCountConnectUnknownClientWithOneIP = false


# Allow shows bots as normal players in the server(in serverbrowser)
#
# Default = false
Fake_player= false


# Allow revemu clients to join your server (steamid subject to substitution)
#
# Default = false
RevEmu_2012 = false

# Reject text for client cs 1.6 max 128 symbol
#
RejectText = Downloading client on https://you_site.com

#Add count player in server name etc. (17/32).
#
#Default false.
#
AddCountPlayerInServerName = false

#Fix crash if you use SourceMod extension connect.ext....
#
#Default false.
#
UseConectSM = true

# Ticket revemu authentication
# Default = True
#
Check_Ticket = True

# Allow connection when it is impossible to check
# Default = False
#
Allow_Fail_Check = False

Check_Ticket_Async = True

[GameServerNSNet]
#Use only tf2 & Dota2 example: EnableNSNetSvc = UDP
#EnableNSNetSvc = [False/UDP/TCP/BOTH]

# if use tf2/dota2/csgo delete '#' before EnableNSNetSvc = UDP
#EnableNSNetSvc = UDP

#ServerIPNSNet =

#NSNetDedicatedPort = PORT(only Slave server)
#AdditionalSlaveServer = IP:PORT
#AdditionalSlaveServer = IP:PORT
#AdditionalSlaveServer = IP:PORT
#AdditionalSlaveServer = IP:PORT

#####
#Etc. Master Server Slave Server1 Slave Server2
# ============= ============= =============
# EnableNSNetSvc = UDP EnableNSNetSvc = UDP EnableNSNetSvc = UDP
#
# #ServerIPNSNet = #ServerIPNSNet = #ServerIPNSNet =
#
# #NSNetDedicatedPort = PORT(only Slave server) NSNetDedicatedPort = 6570 NSNetDedicatedPort = 6571
# AdditionalSlaveServer = 127.0.0.1:6570 #AdditionalSlaveServer = IP:PORT #AdditionalSlaveServer = IP:PORT
# AdditionalSlaveServer = 127.0.0.1:6571 #AdditionalSlaveServer = IP:PORT #AdditionalSlaveServer = IP:PORT
# #AdditionalSlaveServer = 127.0.0.1:6572 #AdditionalSlaveServer = IP:PORT #AdditionalSlaveServer = IP:PORT
# #AdditionalSlaveServer = 127.0.0.1:6573 #AdditionalSlaveServer = IP:PORT #AdditionalSlaveServer = IP:PORT
#
#